We STRONGLY RECOMMEND that customers measure their treadmill for the right WalkTop fit BEFORE placing an order. Please review the Fitting Guide and view all the images and descriptions.
If you are not sure whether or not a WalkTop will fit on your treadmill we are here to help. Email us at email@example.com and provide the following treadmill information so we can help you with a fitting assessment: Brand, Model and photo images
TREADMILL FITTING GUIDE
Download the fitting guide as a PDF right here.
LIST OF TREADMILLS THE WALKTOP FITS
Check out the list of treadmills from owners that a WalkTop will fit right here.
Scroll Down Below For All Images & Ten-Point Fitting Checklist
Scroll Down Below For All Images & Ten-Point Fitting Checklist
The WalkTop™ was designed to fit as many treadmills on the market as possible. There are literally hundreds, if not thousands, of treadmill makes and models sold over the last 20 years. As such, the exact fit depends on the make, model, and year of the treadmill. While we have done everything we can to accommodate as many treadmills as possible, some treadmills are more suitable than others. Depending on your treadmill, there may be a perfect fit, or there may be some workarounds that you should be aware of prior to purchasing.
In some cases, the controls are fully accessible at all times. In other cases, access to the controls may be partially obstructed. This is a design reality that cannot be avoided, but this does not mean that the WalkTop™ won't fit your treadmill or cannot be used. In these cases, the user may need to set the speed prior to starting by standing on the side rails of the treadmill and then begin walking.
IMPORTANT: The WalkTop™ is intended for slower paced walking, not running. Always set your treadmill to a walking speed and always remove the WalkTop™ before running or walking quickly.
Regardless of whether access to controls is unobstructed or partially obstructed, always use the safety tether provided with your treadmill so you can stop the treadmill quickly and safely. In all cases, you should be fully familiar with the location of all controls and the features of your treadmill prior to using the WalkTop.
Or Scroll Down Below For Images and Measurements
General Treadmill Fitting Guidelines
There are a few guidelines for evaluating whether your treadmill, or the treadmill you choose to purchase, will work with the WalkTop™. The following information should help you determine if there is a fit. If you are in doubt, please drop us an email and we will help you! We will ask you about your treadmill make and model, your height, and your comfort level with the functions of your treadmill. If the WalkTop™ is not right for you, we would rather help you determine that prior to purchase in order to respect your time finding an alternate solution that works for you.
Due to the sheer volume and variety of treadmill designs, these guidelines are just that - guidelines. We’ve done our very best to accommodate as many treadmill designs as possible. This guide should help you determine if there is a fit.
If you are ever in doubt, ask us at firstname.lastname@example.org! Send us a photo of your treadmill and we will be happy to help determine if there is a fit for you. We also have a 30 Day Money-Back Guarantee so you can try the WalkTop™ on your treadmill risk free.
Measure the height of your treadmill handrails. Add 2.95 inches (75mm) for the lowest installed desktop height. Add 11.7 inches (297mm) for the highest installed desktop height.
Fully unobstructed access to the controls may be easier or more difficult depending on your height. Some may find it easier to reach above the desk to turn the treadmill on and off. Others may find it easier to reach under the desk. The desktop is clear to assist you in this task. Never over-extend, or attempt to reach further than you can while the treadmill is moving. If ever in doubt, use the emergency tether to stop your treadmill, adjust the speed and incline, and then resume walking.
Other Treadmill Selection Considerations
The WalkTop™ is designed to fit most existing treadmills, however there are other factors that may affect the selection of a good walking treadmill. In addition to the above fitting guidelines, look for treadmills with low RPM, high torque motors that support low starting speeds and high maximum user weights. Horse power, or Continuous Horse Power (CHP), is not always an accurate indicator of suitability. Manufacturers' methods of measuring and reporting CHP may vary.
Look for treadmills with longer tread belt. The width is less important, but treadmills with extremely short tread belts may not be suitable, especially for taller users. The length required is a function of the design and placement of the console as well as the natural stride length of the user.
Some treadmills support both incline and decline. While this is a fantastic new innovation, never set the treadmill to decline when using the WalkTop™. Lower walking speeds can increase load on the motor, especially at a decline. Setting the treadmill to a slight incline helps reduce load on the motor and also increases how much energy you use while walking!
IMPORTANT: Always maintain your treadmill to the manufacturers’ specifications and have it serviced regularly.
How is WalkTop™ Different from Traditional Treadmill Desks?
Traditional treadmill desks are intended for long and extended periods of slow walking - some claiming up to 8 hours a day of continuous use. They consist of a walking treadmill that typically doesn't have handrails and a separate desk that can be adjusted up or down. The maximum speed on many is roughly 4 miles per hour, with some as low as 2mph.
When using the WalkTop™ you must also be walking at slow speeds however the safest optimal speed for slow paced walking is a function of your comfort with treadmill desks, what task you are performing, and largely the length of your legs and natural stride. Also, the WalkTop™ can be removed which allows you to safely enjoy all the functionality of a full-scale treadmill.
Ideally, you should change position frequently! Shift between sitting, standing, and walking. Keep in mind, there's nothing wrong with sitting. The goal is to reduce the hours we spend sitting, not eliminate sitting entirely. We recommend a 30 to 45 minute slow walk while working, then stop the treadmill and stand for 30 to 45 minutes, then return to sitting for 30 to 45 minutes. Changing position frequently is important for your body and also reduces continuous load on the treadmill motor.
This cycle of walking, standing, sitting repeated 4 times throughout the day results in 2 to 3 hours of walking, 2 to 3 hours standing, and 2 to 3 hours of sitting. At the end of the day, remove the WalkTop™ and enjoy a brisk 30 to 45 minute walk or run on your treadmill - something you can't do with a traditional treadmill desk. You'll be surprised how many miles you log using this technique. Your body…and your brain will thank you!